Literature
Technical Tips & FAQs
L11 handle Shaft Dimensions
Question: What is the dimension of the square shaft which inserts into the L11 disconnect switches?
Answer: The L11-S1 and L11-S2 shafts are 1/4" square nominal (.238" actual)
Note - This is the same shaft size as the L10-R1, L10-R2 obsolete L10 Series shafts.
The L11-R7 and L11-R8 shafts are 10 mm square.
The L11-R9 and L11-R10 shafts are 12 mm square.
The L11-R11 and L11-R12 shafts are 12 mm square.
- The L11-R9 and L11-R11 ship with the exact same shaft. The L11-R9 also ships with a special coupling piece needed for installing it on a Non-Fused disconnect switch.
- The L11-R10 and L11-R12 ship with the exact same shaft. The L11-R10 also ships with a special coupling piece needed for installing it on a Non-Fused disconnect switch.
Additional information and instruction sheets on these shafts can be found in Literature Library area
February 2016
Categories: Disconnect Switches
1768 ROK514846
